Tube Rings & Cradles

80mm tube cradle to suit the Takahashi FC-76DC and FS-60Q series of telescopes.

95mm diameter tube cradle to suit the Takahashi FS-78, Sky-90 & FSQ-85EDX series telescopes.

With this rings you can install both above and below the optical tube our PLUS plates or even guide rings. Compatible with telescopes by various brands, such as: Vixen VSD, Vixen AX103S, Vixen ED103D, Takahashi TSA102 and possibly other telescope models as well...

The 95mm PLUS support rings can be used with telescopes of various brands and sizes that come with an optical tube of 95mm diameter.

The 125mm PLUS support rings can be used with telescopes of various brands (such as 120-130mm diameter refractors) with 125mm in diameter optical tube.

The 105mm PLUS support rings are designed for any apochromatic telescope that has plate for photographic tripods connection or for Vixen clamps.

Upgrade for the standard cast tube rings and 45mm dovetail bar supplied with the Evostar-150ED. Constructed from machined aluminium with an anodised finish.

95mm diameter tube cradle with offset balancing plate to suit the Takahashi FSQ-85EDX series. The balance plate allows you to precisely balance which is essential for imaging.

125mm diameter tube cradle without the aux balance plate to suit the Takahashi FSQ-106ED series telescopes.

The 180mm PLUS support rings can be used with telescopes that have 180mm diameter tube like Takahashi TOA150. With these rings, you can broad the possibilities of use of this telescope as it becomes possible

156mm inner diameter tube cradle to suit the Takahashi TOA-130NS/F.

125mm inner diameter tube cradle for the Takahashi FSQ-106ED. A balance plate is also attached for correct balance position which is essential for imaging.