Adaptors

The M81 25mm extension tube can be directly threaded to the ESATTO 3" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser.

Thanks to its low profile, the ESATTO 2" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 2" focuser directly onto the back of these telescopes

Baader UFC Base (Filter Chamber) for 2" / 50.4 / 50x50 filter slider
telescope-sided with S70 dovetail receptor clamp

Takahashi CA ring 150 for TOA-35 to be used with TSA-120, TOA-130 and TOA-150.

This is a quick coupler/eyepiece holder for connecting of 1¼" (31.7mm) eyepieces to Zeiss Diascope spotting scopes.

A widefield camera adapter for all Schmidt-Cassegrain Celestron/Meade telescope tubes. Allows T-2 accessories to be used with an SCT thread.
Telescope side UNC 2" (50.8mm) nut with internal thread. Focus side T-2 external thread. Optical path length 16mm.

This SC 3.3” adapter for ESATTO 2" allows you to connect the ESATTO 2" to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO has a depth of 67mm and the 3.3” adapter has only 2mm of optical thickness

The new Baader protective CANON T-Ring is precision milled to fit your Canon body as if it were a solid piece of metal.

NexYZ fits any eyepiece from 30 mm to 60 mm in diameter including telescopes with 1.25” and 2” eyepieces, spotting scopes, monoculars, and binoculars. NexYZ will also attach to microscopes with the addition of the included microscope adapter ring, which takes the usable diameter down to 25 mm

This handy adaptor converts your internal M63 thread on your William Optics drawtube and leaves you with an external M48 thread to attach your camera.

The M54 tilter is making sensor tilt adjustment much easier than before by allowing you to do the adjustment on the rear end of the camera. You now can make some adjustments during imaging, instead of taking the camera off from the telescope.

This Primaluce Lab Adapter from M81 to M72 female for ESATTO 3" allows you to connect any camera or accessory with M72 male thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube.

During use of heavy photographic instruments like DSLR or cooled CCD cameras (often with filter wheels ), it's crucial to avoid flexures when we insert them into the telescope's focuser.

Takahashi 2" eyepiece adaptor 50.8 to suit the FS-60C and FS-78 series.

The 48 mm T-Adapter is the accessory of choice if you’d like to attach your full frame DSLR or astronomical camera to a Celestron EdgeHD optical tube. With DSLR CCD chips getting larger, Celestron created the 48 mm T-Adapter to reduce vignetting and provide a larger light path to your camera’s sensor, producing exceptional astrophotos.

2 Inch Diascope Bajonett eyepiece adaptor - to fit all Carl Zeiss made Diascope eyepieces onto 2 Inch telescope focusers, use 1.25mm to T-2 nosepiece #2458105