All Products

Power board for HEQ5 in good condition. This is for the older black HEQ5, this is not compatible with the newer white mounts.

Second hand William Optics 50mm guidescope rings with slide base in silver. Excellent condition.

Spare counterweights vital for balancing your telescope on your mount. Allows you to put heavier telescope tubes on your mount by adding extra balance weights.

Spare counterweights vital for balancing your telescope on your mount. Allows you to put heavier telescope tubes on your mount by adding extra balance weights.

The Red Dot Finder makes setting up the telescope a snap. After proper alignment, the Red Dot Finder superimposes a small red dot on the sky, where the telescope is pointed. It is an ideal companion to the wide field short-tube refractors.

Slow motion control set to control your mount in slow increments that is vital when centring objects.

Allows a more reliable wired connection between any Skywatcher Synscan Go-To mount and a PC and certain Android devices. The dongle plugs into the mount’s hand control port and connects to a computer with a USB cable

These quality cast aluminium rings are custom-made for use with either the AZ3, EQ1, EQ2, EQ3-2, EQ4, EQ5, HEQ5 and EQ6 (incl. PRO) mounts/mounting plates.

High quality made wide M48 T mounts for the Pentax K series of cameras. Allows you to connect your Pentax K to a wide variety of coma correctors and field flatteners.

Luminance/Infrared cut-off filters are usually being used with web cameras, color CMOS and CCD cameras to produce better quality images, as these are quite sensitive to infrared (heat) radiation of light.

Are we alone in the Universe? Was there anything before the Big Bang? Are there other universes? What are sunspots? What is a shooting star? Was there ever life on Mars?

Ian Morison's An Amateur's Guide to Observing and Imaging the Heavens - Paperback

This useful adaptor is 2 in 1. The barrell at the bottom unscrews to give a simple 1.25" - T Thread adpator. Leave it on however, and you can also do some eyepiece projection.

A high quality made Mak - SCT thread adpators. Allows you to use SCT threaded accessories such as focal reducers, diagonals & crayford focusers etc on Maksutov telescopes.

High quality SCT - T Thread adaptor. This adaptor screws onto the back SCT threads of your telescope, then allows you to screw your camera with a T Mount directly to the back for prime focus astrophotography.